Tepid Regenerative Absorbent Type Dryer

Product brief

Absorbent type dryer is on the basis of transforming pressure and adsorption principle, take advantage of the inherent microspore of desiccant, absorbs the moisture in the air by capillarity, Absorbs and dries the compressed air by self-heating and tepid regeneration process, to make the temperature of pressure dew point ≤-40.

Working conditions and Specifications:

Air inlet temperature: ≤45°C
Running pressure: ≤0.6~1.0MPa
Pressure damage:  ≤0.02MPa
Oil content of air:  ≤0.2PPm
Dew point of finished product: -40°C
Regenerated air consumption: 5—8%
Running cycle: 4 — 20min
Adsorbent: Activated alumina, with molecular sieve 

call me

Prev:Heatless Regenerative Absorbent Type Dryer

Next:Water-cooled type freezing dryer

Tepid Regenerative Absorbent Type Dryer 

Absorbent type dryer is on the basis of transforming pressure and adsorption principle, take advantage of the inherent microspore of desiccant, absorbs the moisture in the air by capillarity, Absorbs and dries the compressed air by self-heating and tepid regeneration process, to make the temperature of pressure dew point ≤-40.

Working conditions and Specifications:

Air inlet temperature: ≤45°C
Running pressure: ≤0.6~1.0MPa
Pressure damage:  ≤0.02MPa
Oil content of air:  ≤0.2PPm
Dew point of finished product: -40°C
Regenerated air consumption: 5—8%
Running cycle: 4 — 20min
Adsorbent: Activated alumina, with molecular sieve 

 

CONTACT

Factory: No. 62, Tongji Road, Shuige Industrial Park, Lishui, Zhejiang, China
Office: Room 505, BH center, No. 7755, Zhongchun Road, Minhang District, Shanghai, China
E-mail : admin@kingfit.cc
Tel: +86-21-64069032
Fax: +86-21-64069132

Service provider:WZVIP
Customer service