Combined type of low dew point compressed air dryer

Product brief

>>The process of combined type of low dew point compressed air dryer is different from freezing dryer, adsorption dryer, and even series connection method of freezing dryer with adsorption dryer. Therefore, it has high technical performance and promotion of the value to reach lower the dew point, with minimal energy consumption. Compact integration of the two machines makes it easy to install and use, effective drying, and low dew point. Dryer has more than 3 times of service life to save maintenance costs, using less consumption of regeneration and energy conservation. Adopts single-chip microcomputer, to achieve operational control of the automation.
>>Pipe design is strict accordance with industry standards, corporate standards and ISO9001 quality management system, with easy maintenance.
>>Regeneration is divided into two methods, namely electric heating and natural heating. The procedures include regeneration and isopressing, which can maintain stable low dew point.
>>It adopts gaseous diffusion device to make the airflow in the tower distribute evenly to avoid channeling.

call me

Prev:Matching products not found.

Next:Precise filter of compressed air

>>The process of combined type of low dew point compressed air dryer is different from freezing dryer, adsorption dryer, and even series connection method of freezing dryer with adsorption dryer. Therefore, it has high technical performance and promotion of the value to reach lower the dew point, with minimal energy consumption. Compact integration of the two machines makes it easy to install and use, effective drying, and low dew point. Dryer has more than 3 times of service life to save maintenance costs, using less consumption of regeneration and energy conservation. Adopts single-chip microcomputer, to achieve operational control of the automation.
>>Pipe design is strict accordance with industry standards, corporate standards and ISO9001 quality management system, with easy maintenance.
>>Regeneration is divided into two methods, namely electric heating and natural heating. The procedures include regeneration and isopressing, which can maintain stable low dew point.
>>It adopts gaseous diffusion device to make the airflow in the tower distribute evenly to avoid channeling.

Running Condition
>>Installation condition: with well-ventilated, with less dust.
>>Installation sites: smooth without foundation, 80 cm distance from the wall 

Common Parameters
>>Regenerated air consumption:3%-4%
>>Dew point of finished product:-40°C~-70°C
>>Intake air temperature:≤45°C
>>Switching cycle:heatless10-40min(adjustable) Tepid180min
>>Regeneration mode: heatless or tepid
>>Cooling mode: Water cooling, air cooling
>>Oil content of air intake:≤0.1ppm
>>Pressure loss:≤0.05MPa
>>Power:AC220V/380V/50Hz
>>Inlet pressure:0.4MPa~1.0MPa
>>Adsorbent:Alumina(AL203) 

 

CONTACT

Factory: No. 62, Tongji Road, Shuige Industrial Park, Lishui, Zhejiang, China
Office: Room 505, BH center, No. 7755, Zhongchun Road, Minhang District, Shanghai, China
E-mail : admin@kingfit.cc
Tel: +86-21-64069032
Fax: +86-21-64069132

Service provider:WZVIP
Customer service